Posted by fastfarmall on February 18, 2015 at 07:37:53 from (24.92.172.177):
In Reply to: Re: 1256 Repower?? posted by mkirsch on February 18, 2015 at 04:55:09:
mkirsch, I am pretty sure the 18.4 x 38 was a factory tire size, If the pumps were turned up, I cant say for sure. But i did ride in two of the tractors, they were pulling 7-18's and 8-16, what size field cultivators they had, they were big,35-40 ft guessing ! The one thing i noticed the cab was so quiet, i couldnt get a feel for what the engine was doing, but according to the tach, it was pulling down a lot of the time. The other thing was they never punched a hole in the block ! The bottom line was the rods were bent,They first noticed the bearing wear pattern, was not normal! They would fail between 900 and 1050 hours, A school bus, and a tandem delivery truck, or a payloader is a much lighter application !
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
