Posted by sony224422 on February 05, 2015 at 04:22:05 from (107.77.76.84):
I ended up getting a rebuilt carb for my super a as I found rust and all sorts of broken parts in mine from sitting outside. The rebuilder said it was good to go and tuned to his super a. Now I know that it has to be tuned to the tractor but in my manual it only shows an idle screw? Also, I got a new spring for the governor because it seems to have some issues there too. I can push the rod a lot farther and get some good rpm out of it. This tractor was all original when I got it, old ladies dad bought it new. So I want to make sure with the new carb that I adjust everything back.
Basically when I push to full throttle about halfway there it starts revving up and then seems to drop back a little. It barely has enough power for 4th gear. Seems to idle okay, but it does hiccup every once in awhile.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
