Re: Re: Major Farmall H Work!! Help!!!

Posted by Scott L. Swanson on January 10, 2001 at 10:08:06 from (209.180.31.9):

In Reply to: Re: Major Farmall H Work!! Help!!! posted by Phil Auten (TX) on January 10, 2001 at 10:02:50:

Phil:

Thanks for the response. The bolts come out easily. Too easily. The threads inside the head have deteriorated to the point that a bolt can be inserted and in tightening, it just spins. It never tightens up. The threads inside the head are stripped. My only course of action has to be adding threads by drilling out, and going oversize, or drill out rusted material and add thread inserts. Any ideas?

Thanks,

Scott

Follow Ups:

• Re: Re: Re: Major Farmall H Work!! Help!!! Dave G 20:48:57 01/10/01 (0)
• Re: Re: Re: Major Farmall H Work!! Help!!! Murphy 11:18:03 01/10/01 (0)
• Re: Re: Re: Major Farmall H Work!! Help!!! S-E Michigan Part Timer 10:32:30 01/10/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Major Farmall H Work!! Help!!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]