Re: loader for 484

Posted by Garnet on January 09, 2001 at 17:47:44 from (142.177.106.201):

In Reply to: loader for 484 posted by Dale Kite on January 07, 2001 at 19:53:48:

The IH 2200 was widely used on 484s. I believe the 2250 Quick Tach also went on the 484 but not positive. It was used on 584 and 684. The mounting locations on the 484 are a little closer because of the shorter engine. (3 cyl. vs 4 cyl.) Should also be lots of Short lines available. If you want more pump the optional pump on the 84 series simply changed the drive gear to speed the pump up a bit. The kit was still available from Case IH a couple of years ago. I'm not infering that the standard 484 pump isn't enough. It is. My brother ran a 484 with 2200 loader and the optional pump for 12 years. That was a fast loader. A little tricky to ease it with too many engine revs though. No problem with 4x5 bales.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: loader for 484 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]