Posted by F150Mustang on November 23, 2014 at 18:41:52 from (67.41.67.183):
I am currently working on a 1949 M that i have. The pilot bearing on the trans main shaft went bad.
In the process of fixing this ive ran into alot of other problems, my biggest being the bearing cage for the bull pinion shaft is quite worn and the bearing is very sloppy in the cage.
This is my question, i have found a M near me for sale that has been partly scrapped out but the rear end is all intact. But it has a serial number 17,xxx which makes it a 1940. Looking at case parts online there seems to be some differences in parts between the earlys and later ones. Anybody have an idea how many parts would interchange? I also have a 42 M with a clunk in the rear end (presumed bad bullgear) that i plan to fix this winter and thought this scrapped one would be good for getting parts for both.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Lifetime of David Brown - by Samuel Kennedy. I was born in 1950 and reared on my family�s 100 acre farm. It was a fairly typical Northern Ireland farm where the main enterprise was dairying but some pigs, poultry and sheep were also kept. Potatoes were grown for sale and oats were grown to be used for cattle and horse feeding. Up to about 1958 the dairy cows were fed hay with some turnips and after that grass silage was the main winter feed. That same year was the last in which flax was grown on the farm. Flax provided the fibre which w
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
