Re: HELP - 574 fuel shutoff solenoid

Posted by T_Bone on December 25, 2000 at 01:20:56 from (207.254.53.102):

In Reply to: HELP - 574 fuel shutoff solenoid posted by doug on December 24, 2000 at 10:44:49:

Hi Doug,You should be able to unscrew the soleniod and screw in a 3/8NF bolt & nut and set buy running engine at maxmium rpm and adjusting the bolt for non missing condition, then lock the nut. When I bought my 340U it had this set-up and ran just fine. I did however buy the proper needle valve as it looks like someone knew what they were doing instead of the mickey mouse look of the bolt. The exisiting main jet is correct for the solenoid or the needle valve.

T_Bone

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: HELP - 574 fuel shutoff solenoid Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]