Re: bad ring gear on an M

Posted by T_Bone on December 18, 2000 at 18:03:53 from (207.254.52.170):

In Reply to: bad ring gear on an M posted by Charlie on December 18, 2000 at 17:45:58:

Hi Charlie, It real easy. Block the ring gear on 2x4 blocks on the floor and start heating with a torch in a continous circle and when the ring gear expands enough the flywheel will drop to the floor.

Clean the flywheel groove real good and set the new ring gear on top of the flywheel then start heating the new ring gear with a torch in a continous circle and the ring gear will drop on. Let cool slowly and make sure the ring gear is set against the flywheel tight, if not you may have to use a c-clamp to sung it up to the flywheel flange.

T_Bone

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: bad ring gear on an M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]