IH 200

Posted by Ted(MD) on December 11, 2000 at 11:06:34 from (151.196.80.148):

I have a farmall 200 which had a Chisholm-Ryder bean harvester mounted from the factory. I removed the bean harvester and installed fast-hitch. However the hydraulics move very slowly in one direction. This includes both the touch control arms and the fast-hitch. I was told this was due to a flow restricter which was designed to prevent the bean harvester from dropping to quickly. Does anyone know where this restricter might be located? I have replaced the lines from the pump to the hydraulic unit to install the FH control valve. Thanks in advance.

Follow Ups:

• Re: IH 200 Potosi 12:32:26 12/11/00 (0)

Post A Followup Name: E-Mail: Subject: Re: IH 200 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]