Has anyone ever had a problem with

Posted by Farmer Bob on December 02, 2000 at 18:45:01 from (208.49.9.217):

new Federal Mogul rod and main bearings not being the correct thickness? Reworking an Farmall H that had FM IH STD bearings both rods & mains. Ordered new Federal Mogul Standard bearings and they are approx .030 too thin. I mic'd the crank and it is within .003-.005's of the spec in the service manual. Could it be that the new Fed Mogul bearings were made in Mexico (With no thanks to NAFTA)and the correct specs are not understood? I'll be ordering STD IH bearings this next week and see how they measure up. Bummer!!!//FB

Follow Ups:

• Re: Has anyone ever had a problem with justin 19:57:21 12/02/00 (4)
  • Re: Re: Has anyone ever had a problem with Farmer Bob 22:45:19 12/02/00 (3)
    • Re: Re: Re: Has anyone ever had a problem with justin 23:44:18 12/02/00 (2)
      • Re: Re: Re: Re: Has anyone ever had a problem with Farmer Bob 08:57:07 12/03/00 (0)
      • Re: Re: Re: Re: Has anyone ever had a problem with F20II WoW!!! 08:45:02 12/03/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Has anyone ever had a problem with Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]