Posted by 1130Leo on July 30, 2013 at 05:11:47 from (12.188.165.254):
Originally found a broken Pin in the control arm for the Left side remote hydraulics, thought all was fixed with the roll pin. Tested last night, while the control arm and the actual control now work, the remote outlets are still dead, and if I can attach my picture, there is a hose that loops around the right hand remote that has a hydraulic quick connect on it. When i move the left remote control that hose flexes, obvious pressure on it, nothing on the left side remotes. Someone added another set of outlets, that do not have the valves in them, and there are another set of hoses hanging on the left side that apparently quick connect to something??? There is also another control mounted in the cab. I'm guessing I need to remove the seat and remove all this Optional stuff and reconnect the outlets, At least I hope that is all i have to do.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
