If the blade bolt have left hand threads, you have a left hand mower and the blades should rotate counter clockwise. If the blade bolts have right hand threads, then the mower is a right hand and you have the wrong blades. I think the LH would be the normal mower for a C. Go to the Woods website. The manuals are on there for free and you can print them. There will be instructions for installing the belt. I'm not familiar with the woods on the C, but have used a woods on a 140 for years. It's possible to get the belt on wrong and end up with wrong rotation. Did that once and the bolt on one blade unscrewed. Didn't mow worth a flip with the blades turning backwards! From your photos, it looks like your mower has yellow paint which would indicate a right hand mower. The left hand mowers are white.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
