Re: 200 block problems

Posted by 400Dtractorman on January 19, 2013 at 20:31:50 from (24.112.129.167):

In Reply to: 200 block problems posted by tleake on January 18, 2013 at 12:27:11:

First I wouldn't do all the work your talking about unless I used new parts especially the seals. Lot of work and money to put back together with used parts. Just my opinion. The sc and 200 block casting # starts with 35. These blocks are the same. The 230 block # starts with 36. The only difference that I know of is if you want to go to 3 1/4 pistons you can get an over bore kit for the sc and 200. The 230 has to be bored out as the bottom of the block tappers in. All three are 123 but you can't put an overbore kit in a 230 without boring the block. The 230 is a lot stronger motor. Hope this helps. Ed

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]