Posted by IH fan on November 29, 2012 at 02:05:41 from (108.238.225.161):
In Reply to: SC starters on 6V 12V posted by BoonvilleKid on November 28, 2012 at 20:59:55:
Quoting Removed, click Modern View to see
Something I'm very familiar with! Yes it most likely is due to the 12V. system, IF you did not change the field windings in the starter to 12v. when it was changed over. I have a 240U (same C-123 engine) that did the same thing. Starter drive would not engage the flywheel starter ring every time, would grind 2-3-4 times and finally engege almost every time I started it. Starter finally quit and when I took it to my local auto-electric guy, I told him how it had acted for years before it quit. He said the starter is spinning too fast before it engages so he installed 12v. windings in it when he repaired it and now it not only engages every time, but it starts quicker. Cost about $75 on top of the regular repair, so about $175 total, but it sure works great now.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractors and the City Boy - by Ken. A few years back I came to the conclusion that city life wasn�t for me. The houses so close together you could hear the neighbors fight, traffic so heavy speed limit signs meant nothing. So I started looking for the ultimate country setting. After many months I found the perfect place, off the beaten path, up a private � mile drive, old stone house which has stood the test of time, out buildings which haven�t stood the test of time, trees, birds, rabbits, and snakes. This is the place! Bought
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
