Farmall & IHC Tractors Discussion Board |
Re: Re: M with New Idea mounted picker value?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john d on October 22, 2000 at 18:54:15 from (205.188.192.21):
In Reply to: Re: M with New Idea mounted picker value? posted by Dick Davis on October 22, 2000 at 05:19:08:
There was NOTHING in my farm experience to compare with it; I don't think the danger ADDED to the thrill for me, but it was always lurking in my mind.... When I left the farm for college, Dad changed lots of parts of the farming operation, and one of them was to start shelling corn with a combine. I was about 11 years old when Dad first let me steer the picker into the corn. I only went about 50 feet or so, but I was hooked from then on. When I was about 13, we were farming well over 350 acres, and 80 of that total was about 4 miles from home, and across a busy highway. Dad refused to let me pull wagons home and unload into the elevator by myself, feeling that the picker was a safer place for me to be.... Looking back on that now, as a parent and grandparent...I'm not sure I could have put my child on that machine. I asked him a few years ago about that, and he said "Well, I took some criticism from a few folks about it, and I also had some support from a couple of neighbors that knew you well enough to know you WOULDN'T do anything stupid! But I was always uneasy coming back to the field until I saw you still running!" I knew three neighbors very well who had lost hands or arms in pickers. I was a BELIEVER in the danger of that thing. I was always taught to run equipment in the safest possible manner, or not run it at all. Dad would never operate a machine without all the guards and shields in place, equipment was well-maintained, and he taught the safe way of doing things by EXAMPLE. I guess the thing that always scared me as much as anything on that M with a picker was fire. When working in very dry conditions, the trash would build up around me waist-deep in the length of a long field. I'd get to the end of the field, shift everyting to neutral, and clean my area off! I've heard old-time steam locomotive and threshing machine operators talk about the love and attachment they had for those mechanical monsters. For me, that M and picker were the ulitmate! I've still got that M, and the experience is still vivid after more than 40 years!
Follow Ups:
Home
| Forums
Today's Featured Article -
History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|