Re: Belt Pulley on a M

Posted by Farmer Bob on October 16, 2000 at 20:15:22 from (208.49.9.67):

In Reply to: Belt Pulley on a M posted by Ray M41 on October 16, 2000 at 20:08:03:

Ray M41, I removed mine by just pulling carefully on the outer disk that the pulley bolts to. Remove the pulley first and carefully pry out the whole assembly. You shouldn't have to remove the key and nut once it is out of the housing as the new outer gasket should fit right over the two bearings. Don't forget to re-add the transmission oil through the fill plug on top once it's all back together and tightened up.//FB

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Belt Pulley on a M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]