Re: Can't shut 'er down!!!

Posted by JRM on October 16, 2000 at 18:44:18 from (205.188.193.39):

In Reply to: Can't shut 'er down!!! posted by Brian on October 16, 2000 at 15:46:40:

I'm rebuilding my mag now. I think the manual said something about the cup the points sit in has 2 prongs on the side that make contact with the mag housing to ground the mag when you shut it down. If the mag is over oiled, or worn, the prongs won't make good contact. If I remember correctly, you remove the breaker cup from the mag, then the 2 prongs can be bent out slightly until they make good contact.

I'll look it up and let you know. It might be a day or 2.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Can't shut 'er down!!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]