Re: C Tool Box

Posted by Bama Binder on October 02, 2000 at 10:13:30 from (206.5.110.15):

In Reply to: C Tool Box posted by FC on October 02, 2000 at 09:56:43:

I'm not real familiar with the toolbox on a C, or the battery box, but I'll tell you what I used to replace the battery box on my Super H (the battery box is what the seat attaches to). I found that a surplus 20MM ammunition can is about the same width as the box but a few inches longer. With a lot of modifications to the box and 2 extra holes in the original lid, I have a new box for a total cost of about $25 (rather than the $80 for a repro unit). It took about 3 hours of work, but it was cheap (like me). Whether that will work for you on a C I don't know. Otherwise, a welder and bending brake are the way to go if you don't want to pony up for a repro...regards...BB

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: C Tool Box Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]