Farmall & IHC Tractors Discussion Board |
Re: farmall B tread width
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Andy Martin on September 26, 2000 at 19:29:09 from (38.31.75.231):
In Reply to: farmall B tread width posted by Richard on September 26, 2000 at 19:12:15:
Richard, there are eight possible tread widths. First, the wheels can be dished in or out. Second, the rims can be on the outside or inside of the wheels. (the square cutouts around the edge of the wheel is to pass the rim lugs) Third, you can swap sides of the tractor with the tires, in effect turning the rims around to put the lugs closer or farther from the tractor. Four lug choices, inside close, outside close, inside far, outside far coupled with two wheel positions gives 8 total options. Mine measures 68 inches with the wheels dished in, the lugs to the outside of the rims, and bolted to the outside of the wheels. If I bolted them to the inside of the wheels I would probably get 64 inches.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|