300 Utility won;t start.

Posted by Odie on September 19, 2000 at 15:33:48 from (63.38.66.129):

I have an International 300 Utility LP converted to gas. I recently changed the plugs and wires, and now it won't start. It ran before I changed them, but the wires were arcing really bad, and the plugs were super old. I got Autolite spark plugs that were made for the IHC300 Utility (Autolite Part number 3116, used to replace Champion D15Y), and I guessed, and used wires from a 1971 Pinto, but now all I get is an occasional puff of black smoke, and a tired starter. Any ideas? also, What should the spark plug gap be for this model? Thank you

Follow Ups:

• Re: 300 Utility won;t start. Odie 19:13:03 09/19/00 (1)
  • Re: Re: 300 Utility won;t start. Bob M 19:47:11 09/19/00 (0)
• Re: 300 Utility won;t start. Bob M 19:01:29 09/19/00 (0)
• Re: 300 Utility won;t start. ltf in nc 18:54:49 09/19/00 (0)

Post A Followup Name: E-Mail: Subject: Re: 300 Utility won;t start. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]