Re: Steering on H

Posted by Haas on September 19, 2000 at 05:46:51 from (129.37.117.211):

In Reply to: Steering on H posted by Dave on September 18, 2000 at 20:52:50:

Sounds like the ball bearing on the worm gear shaft(Steering wheel shaft) that is inside the steering gear may be worn. This will allow end play in the steering shaft like you describe. The bearing costs less than $10 and is easily replaced. Remove the big plug in the steering gear and you can see it. You'll have to take the shaft loose at the universal joint. Then you can just screw out the worm gear, take the nut off the shaft and replace the bearing with a new one.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Steering on H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]