Re: Re: Coil, Any one will do?

Posted by Andy Martin on September 04, 2000 at 13:12:41 from (38.31.74.217):

In Reply to: Re: Coil, Any one will do? posted by ltf in nc on September 02, 2000 at 11:23:15:

What he said was if your coil has an external resistor, replace it with one that takes an external resistor. Same goes if it has an internal resistor. An external resistor is usually a ceramic block with a small coil of wire on one side, in the hot lead from the ignition switch to the coil. The parts store can help you get an internal or external resistor coil.

Some coils have push on connections, no threads on the posts so you don't want one of those.

Clean and paint your old coil. I have some tractors in regular use with the rear post IH coil. Those must be 40 years old, at least.

Follow Ups:

• Re: Re: Re: Coil, Any one will do? Paul Vance 20:39:58 09/06/00 (1)
  • Re: Re: Re: Re: Coil, Any one will do? Andy Martin 17:50:57 09/07/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Coil, Any one will do? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]