Re: front spindle bushings--HELP!!

Posted by Phil Auten (TX) on August 17, 2000 at 04:32:06 from (206.175.72.226):

In Reply to: front spindle bushings--HELP!! posted by gee on August 16, 2000 at 22:34:34:

The man that told you the bushings would "just slip right in" was either dumber than a post or yanking your chain really hard! The bushings should be a tight fit, possibly even a press fit. Then they must be reamed to fit the spindle on each side. Norm is probably right about the thrust bearings too. You might be able to put the bushings in the freezer for a couple of days and push them in if the axle ends are good and hot from the sun, but I can't help much more than that.

Good luck,
Phil

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: front spindle bushings--HELP!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]