Posted by chad from michigan on July 20, 2011 at 09:51:49 from (151.163.3.10):
well I called my local IH dealer and he really tried to help but everything we looked up was a different number or in a bundle package and then wasn't avalable anymore. So he thinks he got me the shaft seal part number 353183R91 $10.00 he thinks its the right part. I measured my oil seal I took out ID .625", OD 1.125" x .37" THK the local bearing house will have a seal number 6925 to me by tomorrow just incase its .625" x 1.124" x .375" between the 2 I should have the seal. I was able to get the o-rings to seal the manifold to the metal hoses. I mean if the seal seals good what else should I replace if anything? the inside oval o-ring is good to seal the halfs so I should be good right? thanks for the help. I am diffentaly jealous of you guys that have great expereinces finding your parts on-line and at the local dealer. everytime I go there it is about a 90% chance I don't get my part in the first trip. Chad
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
