Re: Super M Timing

Posted by pete 23 on July 14, 2011 at 20:56:12 from (74.32.234.149):

In Reply to: Super M Timing posted by llamraf on July 14, 2011 at 19:42:05:

If I remember correctly, a super has only one mark from factory. Might be wrong on that, may have been MTA'a . At any rate. If the two marks are about a quarter inch apart the first one is tdc. If the first one is about one and seven sixteenths ahead of the second mark it is an added mark for 22 degree advance used to time fire crater pistons at full throttle so second mark is tdc. By doing the old wire in the plug hole you can figure it out . Of course a dial indicator and proper adaptor would be more accurate.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]