Re: 606 Interchange

Posted by kev in iowa on August 10, 2000 at 19:11:27 from (207.177.4.168):

In Reply to: 606 Interchange posted by Jack on August 10, 2000 at 15:57:51:

It is supposed to have a C-221, as did the 460, the other motors of that series will bolt up but they all have more stroke, hence more torque, the clutch won't last. 560s have a bigger clutch, if you saw a 460 and a 560 side by side you would see that the side frame curves in to match the smaller clutch houseing, can't even install a 560 clutch on a 460, bummer. All this is assuming you would use it for farming, if tractor pulling, heavy pto work or other nonstandard activites, maybe.
A 606 is very rare in my area, why not hot rod a 560? Very common, and there are guys out there that know how to do it.
My two cents.
kev

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 606 Interchange Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]