Re: Source for Over Run coupler

Posted by ltf in nc on July 26, 2000 at 18:37:43 from (206.228.214.245):

In Reply to: Source for Over Run coupler posted by Pat on July 26, 2000 at 16:43:26:

This link is a source for a good but inexpensive (approximately $40) over running clutch. Measure the diameter of your PTO shaft as the clutches come in two sizes. If your PTO shaft does not have a notch in one of the splines you will have to take a side grinder and make one. Very minor task. The clutch has a thumb button/pin that holds it on the shaft and that utilizes the notch. This makes it very handy for installing and removing the clutch.

• http://www.Agri-Supply.com/

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Source for Over Run coupler Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]