Posted by mkirsch on April 04, 2011 at 11:37:14 from (64.80.110.74):
In Reply to: Super A hydraulics posted by drmiller on April 04, 2011 at 07:27:17:
In the literal sense, NO, you cannot have true "one way" hydraulics with the Touch Control lift arms on a Super A. They are always two way; power up & power down.
What Jim and NawlensGator are describing is a way to disengage down pressure. The TC lift can't "force" the implement into the ground.
Unfortunately, the lift rod on a Super A does not have the sliding collar like on a 140. The sliding collar arrangement is part of the Fast Hitch design, which came out after the Super A.
On many Super A implements, you WANT pressure on the down stroke.
For those that don't need the pressure, they either used a chain or a spring-loaded link.
Can you describe better what you are trying to do, and why you only want one-way hydraulics?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
