Bill from Virginia said: (quoted from post at 06:19:43 03/26/11)
sflem849 said: (quoted from post at 05:20:57 03/26/11)
CNKS said: (quoted from post at 19:23:11 03/25/11) No new sheet metal for the H or M, OEM does not make it.
I forgot they don't have hoods for the big tractors. I know they have the grills. Page 23 of 2008 has them for $289. You could probably figure $300 by now. That doesn't include the top part. You can get the *Special Service* for another $45 and they will weld your top to their repro bottom.
From what I have seen this stuff isn't like working on cars. You are better off to work with reasonable stuff that you have because you can't just order a fender repair kit like he is used to.
sflem849, I just went to their web site and didn't see any Grilles for an H, except for a small insert. Do you have a link to page 23?
That was for an M,SM, & SMTA.
There is a tool out there to straighten the bars on your grill. I have seen it work at RPRU and it looked very effective.
Edit - Yeah, it looks like you really lose with an H. Hopefully the guys who emailed you have some good parts to offer.
This post was edited by sflem849 at 06:47:07 03/26/11.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
