Posted by D Slater on January 10, 2011 at 10:38:07 from (184.15.10.169):
In Reply to: 560 pops out 4th posted by ricky c on January 10, 2011 at 08:03:26:
If you need to repair inside the transmission and you need the speed and have the power. May consider putting the ring and pinion from International 560 or farmall 400, 450 or W400, 450. Maybe then you could pull in a lower transmission gear thats stronger than the 4th gear. Farmall 560 Pinion gear-15 teeth, Ring gear-49 teeth = 3.26 to 1. Farmall SMTA,400, 450 P-19, R-50 = 2.63 to 1. W 400, 450 P-19, R-47= 2.47 to 1. International 560 P-16. R-49 = 3.06 to 1. There's some other gears but the tractors are not common enough to find the parts from. Don't know which 4th gear ratio your 560 has. there was a option.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor of the Month - by Staff. decals, dependin upon the configuration of the parent company International Harvester in the year of production. For the purpose of this article, we will refer to the tractor as simply a "Farmall Cub". This little tractor was aimed at the needs of the small-acreage farmer - farms of 40 crop acres or less and truck gardens, or for larger farms that needed an extra tractor. Seven or eight implements were initially designed for it: Plow, Disc, Backblade, Sickle-Bar
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
