Posted by Wardner on November 30, 2010 at 12:13:03 from (4.154.255.199):
In Reply to: W-450 loaders posted by KJP800 on November 30, 2010 at 11:27:50:
Loaders are fairly generic. That means they will fit many other tractors with the right brackets. Those mounting kits can be purchased, modified, or home-made. Post a picture and somebody may be able to ID it. Goto the mfg's website and look for mounting kits.
With that info, sell it on Craigslist. If it works, leave it on the tractor so a prospective buyer can see it in operation. It'll bring more money.
It might sell for $100-$200 as scrap. You should be able to get at least $500 if it works well. If it is late model with good paint and no repair welds, it will bring alot more.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
