Re: Mounted sickle bar mower on an A

Posted by Janicholson on November 10, 2010 at 16:08:42 from (67.72.98.45):

In Reply to: Mounted sickle bar mower on an A posted by old on November 10, 2010 at 11:54:03:

With the pitman pivot point aiming at the sickle bar (shortest length), and the bar at the far end of its wear pattern (pretty easy to see) make a square stick from ash or hickory that will clamp into the brackets, but don't drill the holes. Use c clamps to hold it in place (or deck screws) and run it through several cycles by hand to check the stroke. Then adjust if needed and drill for the bolts. Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]