Posted by rustyfarmall on April 17, 2010 at 13:06:49 from (209.152.78.140):
In Reply to: M-SM carb posted by CNKS on April 17, 2010 at 07:18:36:
CNKS said: (quoted from post at 07:18:36 04/17/10) I know that -- Note that I put "fixed" in brackets for lack of a better word. At 5 turns out you cannot add more fuel, but you can reduce it. At 5 turns, and I believe even 4, the tip of the needle is not in the jet. It apparantly reduces the fuel as it gets closer to the jet. I have a Super H and a 460 with that basic carb. When I rebuilt the one on my Super H, I adjusted it like an H or M carb, in until rough, out until smooth. Started cutting out with nothing more than a slight incline -- then I read the manual.
CNKS, that particular screw has NOTHING to do with adjusting the idle. The idle adjustment screw is located ABOVE that one, right next to the idle SPEED adjustment screw.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Lifetime of David Brown - by Samuel Kennedy. I was born in 1950 and reared on my family�s 100 acre farm. It was a fairly typical Northern Ireland farm where the main enterprise was dairying but some pigs, poultry and sheep were also kept. Potatoes were grown for sale and oats were grown to be used for cattle and horse feeding. Up to about 1958 the dairy cows were fed hay with some turnips and after that grass silage was the main winter feed. That same year was the last in which flax was grown on the farm. Flax provided the fibre which w
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
