Re: One final

Posted by Mike CA on December 04, 2009 at 20:48:25 from (99.28.152.102):

In Reply to: One final "process overview" before I tacklet the posted by Mike CA on December 04, 2009 at 08:00:24:

Tom Fleming said: ...start using the brass drift that I referred to in my previous response...

I'll see if he has a brass drift. All mine are metal.

When I look down into the manifold with the front towards me, the valve hinge is towards the rear. I'm assuming you mean to hit the valve itself on the corners that are closest to me? I managed to remove enough rust from the front to make a little gap between the forward part of the valve and the forward inside wall of the manifold. Put the chisel in that "slot"?

How is the valve attached to the valve hinge?

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]