Posted by Hugh MacKay on October 10, 2009 at 00:26:00 from (216.208.58.181):
In Reply to: how to remove a loader posted by martin 3061 on October 09, 2009 at 22:50:09:
Martin: A lot depends on how much you want to take off. The lift boom, complete with bucket and cylinders come very easily. Works best on a level floor, as it will be easier to replace pins when you want it back on tractor. You just drive in chain boom up to ceiling, near pivot closest to you, disconnect plumbing, remove pins and back away. One thing to remember, remove the boom with bucket in place, whole lot easier to handle and it with stand better. As you remove it, place shim boards under one side of bucket if not perfectly level, keeps pin holes lined up.
The sub frame if you want it off, almost has to come off piece by piece. I had a 560 with a 2000, we never did take sub-frame off. Worked well, we just wanted the loader boom and bucket weith off during tillage, haying etc.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Electronic Ignition - by Staff. Oil, for example has come a long way in the last 50 years and I don't use anything but the latest API grade available. I've heard the arguments for non-detergent oils but would never trade it for today's formulations. Paint is another, the modern acrylic enamels are great for resistance to grease and fuel stains, retaining their shine and they last forever; unlike enamels and lacquers . Still another is the alternator. No doubt using the original generator keeps the tractor pure, but for thos
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
