Posted by JeffB on May 01, 2009 at 14:18:10 from (199.197.135.217):
I have an IH 966 that I am having a funny hydraulic issue with. I recently had to drain the rear end of the tractor to do work on the torsion bar. After I had everything back together my 3pt hydraulics acted slow when I first started the tractor I hooked up my mounted chiesel plow and they seemed to operate a little better (I figured they might have been slow because there was still air in the system)but after a while once the fluid was warm they started to slow down. I ran the tractor again today with the chiesel plows and I had the tractor warm and the 3pt worked fine and at what I would call a normal speed. After that I hooked up the cultimulcher and went to lift them but I couldn't(the tractor was at an idle) I could get them to lift if I had the tractor at about 1500 rpm. but they still lifted slow. My only thought was maybe I have an internal leak in the spool valve. Has anyone else had this or a similar problem? Thanks for any help and sorry about such a long post. JeffB
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Mud Daubers and the Old John Deere - by Jon Zehnder. I have a 1941, John Deere Model A tractor I have owned for about a year and a half. This is my first (in case my wife reads this, "FIRST") tractor and it has been a learning experience. After considerable advise and assistance from local tractor nuts and the forums of Yesterday�s Tractors, I had finally got it running pretty well. I have tuned it up, overhauled the carburetor, installed a borrowed, rebuilt magneto, installed a new Power-Trol, patched the radiator, installed new front wheels a
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
