Posted by pete 23 on March 06, 2009 at 10:17:12 from (173.87.1.12):
In Reply to: 460 Diesel findings posted by GoJDpuller on March 04, 2009 at 18:06:31:
Just curius as to which injection nozzle you have, the early models used a bosch, very expensive tips, later ones an IH micro and they started and ran better. Like I posted before, if the automatic advance isn't ajusted properly it will miss like crazy at high speed , no load. There is a total of 4 degrees advance at pump which is 8 degrees on the engine. I had a lot of customers bring in theie nozzles for testing when the problem was a simple adjustment. Also these nozzles usually need a good rap on the test pump to operate properly even new and especially when they get a few hours on them. Be extra careful when installing them so as to keep the precup alligned properly in head.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Piston Ring Removal and Replacement - by Chris Pratt. Piston Ring Removal and Replacement - Replacing rings is a fairly easy process to stretch the engines usability between major rebuilds and cut down on that blue smoke and high oil consumption. Frequently, replacing only the rings is not advisable because by the time you do the teardown and measurement of the components, the pistons are often beyond the manufacturers specification or something else you find will signify the need for a major rebu
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
