Posted by the tractor vet on February 26, 2009 at 20:09:35 from (75.19.120.250):
In Reply to: 1456 slippage posted by joe 1971 on February 26, 2009 at 16:16:35:
Thats a bit on the high side for pressures but ya can live with them . Like Owen said are you 100% sure that they machined the step on the flywheel wright with a step hight of 1.938 inches . Now i do not know just where ya got the clutch from but here again like Owen said are you sure that ya took out the shipping stops . are you sure that ya got the disc in correctly . Now it is possible that the T/A is total toast . But in all that i have done i have never run across one yet . I have only see one tractor that could walk thru a T/A even with 400 lbs pressure for lock up and it was not a Farm Stock one .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: What's in Your Tractor's Toolbox? - by Staff. This recent discussion on the Tractor Talk discussion board here at the on-line magazine drew so much response and proved to be so interesting that we wanted to share it with you here. The names of the people participating in the discussion have been left out to "protect the innocent" (to quote a once-popular television series).
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
