Posted by tcanthonyii on January 03, 2009 at 14:50:48 from (71.31.200.148):
This spring I am putting power steering on my M. I have the pump (M&W) and Behlen power steering. I think I even have a flow diverter. I was even able to find a manual on Ebay. Anyway I want to use the live pump on my loader as well. It's an old Stanhoist with one way cylinders. I will also at some point be adding a cylinder to the bucket so I don't have to drop it down to click the bucket. I also use my loader to get into my trees to trim them and it would be nice to change the angle for easier standing, not to mention cleaning up around the place. I can get a the bucket and tines level for leaning up pine needles snow etc.
Anyway can I use the live hydraulics on one way cylinders? I don't think I can but didn't know if there was a way to run the hoses to make it work. Also the behlen manual calls for medium weight hydraulic oil. Would it be safe to assume I could use regular hydralic fluid in the this setup? I know I can't with the belly pump but didn't know if i could with this setup.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fabricating Sidesheets - by Chris Pratt. The easiest and best first-time project for wanna-be sheet-metal workers like myself is flat or nearly flat metal cut and drilled to be a tractor's sidesheet. A sidesheet is sheetmetal to cover either the engine as in the case of early Oliver's, Massey-Harris' and many crawlers or the wiring and electrical components as in the case of the Massey-Harris Pony, Allis Chalmers' D Series (D-14, D-15, D-12, D-10, D-17, and D-19). The need for fabricating becomes obvious when you go to buy any of these
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
