Posted by GertM on December 23, 2008 at 08:56:22 from (86.89.136.158):
Hi Folks,
I have an M over here and have some questions. Since I had an 100% overhaul of the rear end and everything went out I have a chance I changed the bull gears.I didn't marked them.They seem to be the same.Is this bad or is it possible they will wine? Second are the bull gears reversible inside out:will they fit on one way on the axle?
Is the gap between pinion and bevel gear noticable with your hand when you turn pinion and move bevelgear.I know there has to be some distance and free space but I guess maybe its too tight. What are particular places to look for cracks in/on the head?Not any I can see but inside isn't easy to check.Its an 6336 DA head.
Has anyone an undented M hood around.Mine is rather worn but maybe someone can help me with it?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: What's in Your Tractor's Toolbox? - by Staff. This recent discussion on the Tractor Talk discussion board here at the on-line magazine drew so much response and proved to be so interesting that we wanted to share it with you here. The names of the people participating in the discussion have been left out to "protect the innocent" (to quote a once-popular television series).
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
