Re: low oil pressure in 1939 farmall H

Posted by mkirsch on August 22, 2008 at 12:43:14 from (64.80.110.50):

In Reply to: low oil pressure in 1939 farmall H posted by scott rukke on August 22, 2008 at 11:41:48:

I asked a similar question here a few weeks ago about my Cub engine. It starts out at 30PSI, then as it warms up, it drops down to about 16PSI.

I was told that the most likely cause of the issue was the main and rod bearings being worn.

Don't bother putting SAE30 oil in it. Waste of money. I put 20W50 in mine, which should be thicker warm than straight 30. It didn't make a snot bit of difference.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]