Re: Super A Touch Control question for Hugh or anyone

Posted by Daniel H. on August 06, 2008 at 12:30:28 from (66.226.34.159):

In Reply to: Super A Touch Control question for Hugh or anyone posted by Ron in Nebr on August 06, 2008 at 10:49:55:

If you have a pesco pump number 051012-020-01 thru 051012-020-07 and 051012- 024-05 thru 051012-024-07 (the numbers are stamped into the pump) a rebuild kit is available under part number 355207R91 for around $35.00. If it is not a pesco, I think there is a different number for the kit. The kit includes a set of instructions. If the shaft is a groove where the seal rides, you will need a speedi-sleeve or it will leak again. This is a speedi-sleeve:



Info. on speedi-sleeves:

http://www2.chicago-rawhide.com/faq/1.html

You can get the sleeve through NAPA once you determine the part number based on the shaft size.

Not a bad job, but everything must be kept super clean.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]