Posted by tractorsam on March 11, 2009 at 17:47:51 from (142.177.20.124):
In Reply to: Re: 140 Hydraulics posted by Hugh MacKay on March 11, 2009 at 16:27:09:
Hi Hugh, I would have said that Moncton was decent. I was up a couple of years ago (the last ag one) and there wasn't a whole lot new since then. However there were some people I wanted to see and some questions I needed to ask so it was worth the trip. Allan (or at least his business) was at the show, I don't know that I've ever met Allan so I couldn't say for sure. I bought a couple of Farmall books, one because it had a lot of pictures of tractors when they were new, a photo archive book featuring M's in their heyday(having bought that SMD) and a manual on rebuilding magneto's (as I'm currently trying to get a mag-equipped W-4 to go).
Feel free to give me a call about the hydraulics, I find it much easier to explain these things over the phone than by typing them out. I tried calling you a few times but couldn't get through.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review - by Staff. When we finally checked out the 3000 PSI North Star, the whole story chaned. This unit was equipped with an 11 HP Honda engine with fuel shutoff, adjustable flow and optional syphon degreaser dispenser. It didn't have a pressure release or electric start to facilitate easy starting but according to the instructions, simply pulling on the trigger while cranking was sufficient. This method of starting proved more than adequate and kept the cost down on the unit. It had all the important
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
