|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Plowing with a 400D
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by john d on March 06, 2000 at 06:04:27 from (206.141.74.34):
In Reply to: Re: Re: Re: Re: Plowing with a 400D posted by Rory A on March 05, 2000 at 15:18:08:
When using the trailing plow, don't turn too sharply at the end of the field. It's possible to get a rear tire into the plow. It WILL do a better job of plowing than the mounted plow. Getting the hitch set properly can take some know-how and/or experience. If this plow and tractor haven't been used together before, make sure you have the rear wheels properly spaced and the plow hitched at the proper point of the drawbar, etc. The plow hitch also likely has a lot of adjustment opportunity. If you need help with any of this, put in a post, and you'll likely get what you need.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Profile: Oliver 70 Row Crop - by Staff. The Oliver 70 was part of the "Fleetline Series" and was manufacturered from 1937 to 1948. The row-crop configuration could have either dual or single front wheels. The Oliver 70 was also offered in the standard, orchard and industrial configurations. The tractors were sold in Canada. An early advertisement states "Power when you want it - power when you need it - power to help put in crops when field conditions are right and time and help are limited. That's the power you'll find in an Oliv
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
