Posted by 460anger on February 04, 2008 at 15:53:58 from (71.240.207.147):
In Reply to: Re: super h knock posted by D Slater on February 03, 2008 at 20:14:05:
Got a chance to play with it again tonight. Couldn't get it to knock at first. Started reving the heck out of it. It started to make a knock. Took plug wires off. Didn't stop. Played with the hydraulic lever, at first it didn't make much difference, reved up some more, the knock went away. My thought is... the valve that was stuck, might still have been sticking alittle bit. Or the hydraulic pump didn't have any oil in it, but does now. I've let it run for the last half hour running it hard and easy. Can't make it knock at all now. Maybe just from setting so long, things needed to get freed up and oiled up. Thanks for all the answer and thoughts.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
