Re: Drawbar and D-ring for Farmall

Posted by Randy-IA on December 23, 2007 at 11:57:25 from (207.177.83.166):

In Reply to: Drawbar and D-ring for Farmall posted by Lewis Thomason on December 23, 2007 at 11:11:19:

This is old information from the local salvage yard from about 9 or 10 months ago . I asked about those pieces . Around $75 back then for all . The roller might arguably be the most pricey item in the list . I paid about $25 for my roller but it was pretty worn out and stuck . I passed on the other pieces . I fixed the roller and straightened ( more or less ) the swinging drawbar I had on a press . The standard drawbar is still a welded up mess but it works so I left it alone and spaced the roller to fit . If I really needed them I'd pay up to a hundred for all of them . New swinging drawbars are close to two hundred now I THINK . Take this with a grain of salt ...Randy

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]