Posted by Don Anderson on October 15, 2007 at 08:07:45 from (68.93.196.91):
I have another problem with my Farmall 200 that I hope someone will be able to help me with. This Summer I used a Woods belly mower on it and now want to use the plow on the garden so I took the mower off and have just about everything hooked up except the hydraulic cylinder that raises and lowers the hitch. First are the lines on the cylinder on the bottom or top and do they point to the rear of the tractor or front? Second, there is a metal block that has one hydraulic line going into it and two going out to the cylinder. Where is this supposed to mount? Wherever it was orignally it looks like it was fastened with two quarter inch bolts. And lastly, where does the input line attach to? Thanks for any assistance. Seems like I always receive some good information. By the way I do have the operators manual for the tractor but the pictures are pretty vague.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
