Re: Super H or straight H engine??Please advise

Posted by City-Boy McCoy on August 13, 2007 at 06:24:50 from (70.149.201.183):

In Reply to: Super H or straight H engine??Please advise posted by BIG RED 1 on August 13, 2007 at 06:15:58:

If it is a Super H engine, it will have a "164" cast into the engine block on the right side, approximately over the oil filter cover. This designates the cubic inches of a Super H. A regular H is 152 cubic inches, and has no cubic inch casting on the side of the block. Dipstick tube indicates engine is from a power unit or harvesting machine of some kind - or, perhaps a much later model tractor. I cannot help you with your points as my reference books are at another location. However, I believe .013 is for a magneto ignition and .020 is for a battery ignition. mike

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]