Re: How do you adjust the seat tension?

Posted by Doug N on August 08, 2007 at 15:11:41 from (205.188.116.73):

In Reply to: Re: How do you adjust the seat tension? posted by Janicholson on August 08, 2007 at 05:46:30:

Jim, Yes I know that. What I was getting at is: Say a spring takes 300 lbs to fully compress it. Say the spring's free length is 16". So if the spring is at 16", 300lbs can compress it fully, if the spring is at 10" it still takes 300 lbs to fully compress it.

You can't put 400 lbs on that spring and expect to adjust it almost all the way down and expect it not to bottom out. I know that springs get stronger when compressed, but they still have a maximum rating before they will bottom out.

I probably should have worded it better this morning. Doug N

Replies:

• Re: How do you adjust the seat tension? Janicholson 12:49:11 08/09/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]