Re: Instructions for the guy on the binder, please...

Posted by agpilot on August 01, 2007 at 08:25:43 from (206.146.78.170):

In Reply to: Instructions for the guy on the binder, please... posted by Crazy Red Power - S.E.-Wi on August 01, 2007 at 08:03:35:

Hello: Good advice on 1st reply. I might add that the reel be not set too low. Try just below the heads of the grain. Lower tend to flip-flop the entire length of the grain stalk. The idea is to have a nice uniform placement of the grain into the knotters so the bundel will be tight and easy to handel in stacking as well as transporting later without falling apart. agpilot....
Ps: I always enjoyed cutting small grain such as Oats and Wheat... And Barley once.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]