Farmall 300 Hydraulics Again

Posted by Matt Weltz on July 30, 2007 at 19:43:38 from (167.142.225.158):

About a week ago I was having problems with my hydraulics on my 300. The pump was bogging the engine down and getting really hot after on a few minutes of running. After some trial and error testing, I discovered that a screen/plug in an orifice in the pressure regulator block had collapsed and was acting like a plug, sending pressure to the hydraulics all the time. I have since gotten this fixed, but the pump still seems to bog the engine down ever so slightly and the pump does get warm still; although not near as bad as it was. After 10 minutes of running, the pump was about as warm to the touch as the side of the block. I am not real familiar with 300's and this is my first Farmall so I would just like to see if this is a normal thing or if I still have problems. Thanks...

Replies:

• Re: Farmall 300 Hydraulics Again Owen Aaland 21:19:20 07/30/07 (0)
• Re: Farmall 300 Hydraulics Again georgeky 19:56:52 07/30/07 (3)
  • Re: Farmall 300 Hydraulics Again Matt Weltz 20:01:55 07/30/07 (2)
    • Re: Farmall 300 Hydraulics Again georgeky 20:07:25 07/30/07 (1)
      • Re: Farmall 300 Hydraulics Again Matt Weltz 06:19:14 07/31/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]